Relieve the pressure from this year’s grazing
1st December 2021
The Ceres Sub-Line Grassland Subsoiler is a low-cost, but highly efficient way to rejuvenate and sustain healthy grassland, by relieving compression from the year’s livestock, water and general traffic, with
The Ceres Sub-Line Grassland Subsoiler is a low-cost, but highly efficient way to rejuvenate and sustain healthy grassland, by relieving compression from the year’s livestock, water and general traffic, with minimal disturbance, and helping to prevent water damage and further compression moving into the new season.
The Sub-Line is designed to achieve the maximum efficiency from your soil by lifting and shattering compaction, allowing air, water and nutrients to flow into the substructure, thus enabling the roots and microbacteria to fulfil their potential.
The strong environmental credentials of this machine include its contoured, low-draft legs, which are mounted in-line, achieving great lift and shatter with minimal horsepower and fuel consumption. It also helps water to dissipate through the soil structure, preventing flash run-off, or worse, standing water that will further compact the soil, deprive the soil of oxygen and emit greenhouse gases. Additionally, like all Ceres machinery, the Sub-Line is designed, built and manufactured in the UK, reducing its carbon footprint.
The Sub-Line is suitable for all levels of soil management, including contractors and farmers, and as it has been designed for UK soils, it can be more effective than other more expensive machines. The leading discs have independent suspension to help prevent damage to the discs and overload and shock of bearings. All of the discs can be adjusted with one handle, which has six working positions and one out-of-work position. The discs can be kept in their optimum working position, cutting through the sward cleanly, allowing the leg to pass through without tearing the surface. Each of the legs are mounted on the substantial frame, with two M16 shear bolts for protection. The legs, knock on points and all other wearing components are widely available, which reduces cost and downtime.
It is equipped with a 460mm diameter flat rear roller, which has simple dual turn-buckle adjustment to control the working depth of the machine, and leaves a neat, level finish across the width of the work. There is a galvanised, adjustable scraper mounted within the roller arms to prevent congestion and build-up.
The Sub-Line is available from a single leg machine up to a five-leg machine. All sizes are compatible with Category 2 linkage, from 40–190 hp. Other variants can be designed and built to order, including optional trailing harrow and applicator platform.
